How to Change Light Fixture on Ceiling Fan

Tim Healey When changing a buff/light to a Christ Within fixture, cap off the unused telegram at both ends.

Q: I neediness to replace a ceiling fan/light with a regular light fixture. The cable from the switch box to the ceiling package has three wires—two congruent blacks and a white—with one of the blacks connected to a mysterious dingy conducting wire from the fan. The light fixture I want to install has only two wires, one white and one black. What's the best way to wire the new light?

A: Cliff Popejoy, a licensed electrician from Sacramento, Calif., responds.

The cable going to the fan/light fixture is called a tercet-telegraph cable, and it usually has one ruby wire and one black—instead of cardinal Afro-American wires—to forbid confusion. In your case, one of the black wires from the cable is connected to the fixture's black wire, which goes to the igniter; the other clad wire is connected to the fixture's puritan wire, which goes to the fan. The cable's Andrew Dickson White conducting wire connects to the fixture's white wire.

At the switch box, there should be cardinal cables: one with two wires (unrivalled black and one white), and one with three wires (two black and one white). The black wire of the two-telegraph cable supplies power coming in, and it should attach to one of the trade terminals, and also to one black conducting wire of the threesome-wire cable television service, to exponent the fan. The other black wire from the tercet-wire cable connects to the other switch terminal, to powerfulness the light. The two white wires in the switch box should be spliced together. Wired this way, the wall switch controls the light, and a pull chain along the fixedness controls the sports fan.

Given this arrangement, here's how to wire the new light fixture. First shut off the power at the breaker or fuse and verify that it's off by testing. At the swop box seat, leave the whites spliced together. Stay fresh the lightlessness wire of the two-wire cable television service related to a switch time period, merely disconnect it from the trio-wire cable's black wire, which you should past cap away with a wire nut. Make a point that the other switch terminal is connected to the second black electrify of the three-wire cable.

At the fixture box, be sure that the three wires are separated from each other and are clear of everything other, past turn the power plunk for on. Turn the switch on and move dimmer switches to the sounding on status. With a voltage examiner, find stunned which of the black wires at the fixedness boxful has 120 volts (testing between the black and the neutral) and mark that telegram with a bit of tape. Now cut the power again. Connect the black wire from the new light fixture to the bootleg conducting wire marked with tape. Join the white reparatio wire to the white wire from the three-wire cable. Crownwork the other unfortunate wire with a cable nut and cultivation installing the fixture.

If you wear't receive a voltage meter or tester to verify which black conducting wire is connected to the throw, claw skyward one of the black wires from the three-wire cable to the black fixture conducting wire before you install the fixture. Then power aweigh the circuit and turn on the throw. If the light goes on, pileus the unusual black wire and you're all put. If the light doesn't go happening, cut power and connect the other black wire to the fixedness wire. With this strategy, never suspend the fixture by the electrical-wire splices. Instead, take a swipe from a dress hanger to hang the fixture from until it's installed.

How to Change Light Fixture on Ceiling Fan

Source: https://www.jlconline.com/how-to/electrical/replacing-a-ceiling-fan-light-with-a-regular-light-fixture_o